Engineering Materials Objective Questions with Answers - Set 23

Practice Test: Question Set - 23


1. Acidic solution is one which has pH value
    (A) Greater than 7
    (B) Less than 7
    (C) Equal to 7
    (D) pH value has nothing to do with neutral solution

2. Basic solution is one which has pH value
    (A) Greater than 7
    (B) Equal to 7
    (C) Less than 7
    (D) pH value has nothing to do with basic solution

3. Pearlite is a combination of
    (A) Ferrite and cementite
    (B) Cementite and gamma iron
    (C) Ferrite and austenite
    (D) Ferrite and iron graphite

4. Austenite is a combination of
    (A) Ferrite and cementite
    (B) Cementite and gamma iron
    (C) Ferrite and austenite
    (D) Ferrite and iron graphite

5. Specify the sequence correctly
    (A) Grain growth, recrystallization, stress relief
    (B) Stress relief, grain growth, recrystallization
    (C) Stress relief, recrystallization, grain growth
    (D) Grain growth, stress relief, recrystallization

6. The transistor is made of
    (A) Silver
    (B) Gold
    (C) Copper
    (D) Germanium

7. Thermoplastic materials are those materials which
    (A) Are formed into shape under heat and pressure and results in a permanently hard product
    (B) Do not become hard with the application of heat and pressure and no chemical change occurs
    (C) Are flexible and can withstand considerable wear under suitable conditions
    (D) Are used as a friction lining for clutches and brakes

8. The percentage of carbon in cast iron varies from
    (A) 0.1 to 0.5
    (B) 0.5 to 1
    (C) 1 to 1.7
    (D) 1.7 to 4.5

9. The hardness and tensile strength in austenitic stainless steel can be increased by
    (A) Hardening and cold working
    (B) Normalizing
    (C) Martempering
    (D) Full annealing

10. An alloy steel which is work hardenable and which is used to make the blades of bulldozers, bucket wheel excavators and other earth moving equipment contain iron, carbon and
    (A) Chromium
    (B) Silicon
    (C) Manganese
    (D) Magnesium

11. Beryllium bronze contains
    (A) 60% copper and 40% beryllium
    (B) 80% copper and 20% beryllium
    (C) 97.75% copper and 2.25% beryllium
    (D) 99% copper and 1% beryllium

12. Cast iron is manufactured in
    (A) Blast furnace
    (B) Cupola
    (C) Open hearth furnace
    (D) Bessemer converter

13. The lower critical point for all steels is
    (A) 600°C
    (B) 700°C
    (C) 723°C
    (D) 913°C

14. The hardness of steel increases if it contains
    (A) Pearlite
    (B) Ferrite
    (C) Cementite
    (D) Martensite

15. The cupola is used to manufacture
    (A) Pig iron
    (B) Cast iron
    (C) Wrought iron
    (D) Steel

Show and hide multiple DIV using JavaScript View All Answers


Engineering Materials:
  Set 01      Set 02      Set 03      Set 04      Set 05      Set 06      Set 07      Set 08      Set 09
  Set 10      Set 11      Set 12      Set 13      Set 14      Set 15      Set 16      Set 17      Set 18
  Set 19      Set 20      Set 21      Set 22      Set 23      Set 24
Share on Google Plus

    FB Comments
    Comments

0 comments:

Post a Comment