Engineering Drawing Online Practice Test - Set 12

Practice Test: Question Set - 12


1. In the mechanical design process the first step is to ________.
    (A) Brainstorm solutions
    (B) Prepare rough sketches
    (C) Prepare a budget
    (D) Identify the problem

2. In architectural drawing ________ are often used to illustrate and detail structural components.
    (A) Foundation beam detail sections
    (B) Wall sections
    (C) Building sections
    (D) All of the above

3. This is the term for the range of tightness or looseness resulting from the allowances and tolerances in mating parts:
    (A) Limits
    (B) Fit
    (C) Specifications
    (D) Allowance

4. In isometric projection, all distances are approximately this percentage of their true size:
    (A) 120 percent
    (B) 80 percent
    (C) 50 percent
    (D) 20 percent

5. It is customary for the first sheet of a working drawing set to include __________.
    (A) A parts list
    (B) Exploded assembly
    (C) Assembled assembly
    (D) All of the above

6. The typical parts list should include the _________.
    (A) Part number
    (B) Manufacturing material
    (C) Number of parts needed
    (D) All of the above

7. Some of the standard Auto-CAD text styles used in architectural drawings includes _________.
    (A) City Blueprint
    (B) Country Blueprint
    (C) Stylus BT
    (D) All of the above

8. This is the smallest diameter of a screw thread:
    (A) Internal thread diameter
    (B) Minor diameter
    (C) Major diameter
    (D) External thread diameter

9. When creating a Cutting Plane line with Auto-CAD it is customary to use a ________ to create the line.
    (A) Center line
    (B) Polyline
    (C) Dashed line
    (D) Hatch line

10. Acceptable parts must not extend beyond this:
    (A) Boundary limits
    (B) Hole limits
    (C) Specification
    (D) Tolerances

11. Lines of an isometric drawing that are not parallel to the isometric axes are called this:
    (A) Trimetric lines
    (B) Non-isometric lines
    (C) Multiview lines
    (D) Dimetric lines

12. The second line of dimensions out from the plan generally includes _________.
    (A) Centers of doors and windows
    (B) The distances between outside walls and interior walls
    (C) The measurement from the outside of the brick to the inside of the exterior wall
    (D) The measurement from one outside corner to the opposite outside corner

13. Dimension text is generally placed above the ________ line.
    (A) Dimension
    (B) Extension
    (C) Center
    (D) Leader

14. The section view drawing in which one fourth of an object has been marked for removal is known as a _________ section.
    (A) Full
    (B) Half
    (C) Quarter
    (D) None of the above

15. The thread note for a typical bolt will include the _________.
    (A) Major diameter of the thread
    (B) Material
    (C) Center line
    (D) Offset distance

Show and hide multiple DIV using JavaScript View All Answers


Mechanical Engineering Drawing:
  Set 01      Set 02      Set 03      Set 04      Set 05      Set 06      Set 07      Set 08      Set 09
  Set 10      Set 11      Set 12      Set 13      Set 14      Set 15      Set 16      Set 17
Share on Google Plus

    FB Comments
    Comments

0 comments:

Post a Comment