# Practice Test: Question Set - 09

1. The ________ tool on the Dimension tool bar places the length of an arch on a drawing.
(B) Arc Length
(D) Diameter

2. A half-moon protractor is divided into how many degrees?
(A) 360
(B) 180
(C) 270
(D) 310

3. If a plane is parallel to the plane of projection, it appears:
(A) True size
(B) As a line or edge
(C) Foreshortened
(D) As an oblique surface

4. When adding dimensions to an auxiliary view it will be necessary to use the ________ tool.
(A) Linear dimension
(B) Aligned dimension
(C) Baseline dimension
(D) Angle dimension

5. The daily workload of a ________ drafter would generally include technical drawings of machine parts.
(A) Architectural
(B) Civil
(C) Electrical
(D) Mechanical

6. This is a line terminated by arrowheads, indicating the direction and extent of a dimension:
(A) Dimension line
(B) Extension line
(D) Centerline

7. A civil engineer working on a bridge design would probably rely on his ________ scale for checking printed drawings.
(A) Engineer's
(B) Metric
(C) Architect's
(D) None of the above

8. This is the plane upon which the top view is projected:
(A) Horizontal
(B) Frontal
(C) Profile
(D) Base

9. The lines used to create the auxiliary view should appear as ________ in the finished view.
(A) Object lines
(B) Construction lines
(C) Reference lines
(D) Construction lines

10. In oblique sketches, the most commonly used angles for receding lines are:
(A) 15 or 30 degrees
(B) 25 or 30 degrees
(C) 30 or 45 degrees
(D) 45 or 60 degrees

11. This is the total amount that the feature on the actual part is allowed to vary from what is specified by the dimension:
(A) Allowance
(B) Tolerance
(C) Specification
(D) Difference

12. An engineer's scale would be used to measure lines on a drawing where the scale factor reads ________.
(A) 1/4" = 1'-0"
(B) 1/8" = 1'-0"
(C) 1" = 100'
(D) 3/4" = 1'-0"

13. An advantage of this type of view is that each view shows the object all the way through as if it were transparent:
(A) Planar
(B) Horizontal
(C) Auxiliary
(D) Orthographic

14. This type of solid is formed by sweeping a shape along a linear path:
(A) Planar solid
(B) Revolved solid
(C) Warped solid
(D) Extruded solid

15. Some of the common terms used to describe technical drawing include:
(A) Drafting
(B) Engineering Graphics
(C) Engineering Drawing
(D) All of the above

Show and hide multiple DIV using JavaScript View All Answers