Free Online Practice test on Strength of materials - Set 13

Practice Test: Question Set - 13

1. Which of the following materials is most elastic?
    (A) Rubber
    (B) Plastic
    (C) Brass
    (D) Steel

2. Strain is equal to (where l = Original length, and δl = Change in length)
    (A) l/δl
    (B) δl/l
    (C) l.δl
    (D) l + δl

3. The ratio of direct stress to volumetric strain in case of a body subjected to three mutually perpendicular stresses of equal intensity, is equal to
    (A) Young's modulus
    (B) Bulk modulus
    (C) Modulus of rigidity
    (D) Modulus of elasticity

4. Which of the following statement is wrong?
    (A) The deformation of the bar per unit length in the direction of the force is called linear strain.
    (B) The Poisson's ratio is the ratio of lateral strain to the linear strain.
    (C) The ratio of change in volume to the original volume is called volumetric strain.
    (D) The bulk modulus is the ratio of linear stress to the linear strain.

5. Diamond riveted joint can be adopted in the case of following type of joint
    (A) Butt joint
    (B) Lap joint
    (C) Double riveted lap joints
    (D) All types of joints

6. When a body is subjected to biaxial stress i.e. direct stresses (σx) and (σy) in two mutually perpendicular planes accompanied by a simple shear stress (τxy), then minimum normal stress is
    (A) x + σy)/2 + (1/2) × √[(σx - σy)² + 4 τ²xy]
    (B) x + σy)/2 - (1/2) × √[(σx - σy)² + 4 τ²xy]
    (C) x - σy)/2 + (1/2) × √[(σx + σy)² + 4 τ²xy]
    (D) x - σy)/2 - (1/2) × √[(σx + σy)² + 4 τ²xy]

7. The unit of Young's modulus is
    (A) mm/mm
    (B) kg/cm
    (C) Kg
    (D) kg/cm²

8. When a body is subjected to three mutually perpendicular stresses, of equal intensity, the ratio of direct stress to the corresponding volumetric strain is known as
    (A) Young's modulus
    (B) Modulus of rigidity
    (C) Bulk modulus
    (D) Poisson's ratio

9. The value of modulus of elasticity for mild steel is of the order of
    (A) 2.1 × 10⁵ kg/cm²
    (B) 2.1 × 10⁶ kg/cm²
    (C) 2.1 × 10⁷ kg/cm²
    (D) 0.1 × 10⁶ kg/cm²

10. A pressure vessel is said to be a thick shell, when
    (A) It is made of thick sheets
    (B) The internal pressure is very high
    (C) The ratio of wall thickness of the vessel to its diameter is less than 1/10.
    (D) The ratio of wall thickness of the vessel to its diameter is greater than 1/10.

11. The strain energy stored in a body due to suddenly applied load compared to when it is applied gradually is
    (A) Same
    (B) Twice
    (C) Four times
    (D) Eight times

12. The deformation of a bar under its own weight compared to the deformation of same body subjected to a direct load equal to weight of the body is
    (A) Same
    (B) Double
    (C) Half
    (D) Four times

13. A continuous beam is one which is
    (A) Fixed at both ends
    (B) Fixed at one end and free at the other end
    (C) Supported on more than two supports
    (D) Extending beyond the supports

14. The radius of the Mohr’s circle in the given figure is equal to
Som Question No 14

    (A) Sum of two principal stresses
    (B) Difference of two principal stresses
    (C) Half the sum of two principal stresses
    (D) Half the difference of two principal stresses

15. The maximum shear stress, in the given figure, is equal to __________ of the Mohr's circle.

    (A) Radius
    (B) Diameter
    (C) Circumference
    (D) Area

Show and hide multiple DIV using JavaScript View All Answers

Strength of Materials:
  Set 01      Set 02      Set 03      Set 04      Set 05      Set 06      Set 07      Set 08      Set 09
  Set 10      Set 11      Set 12      Set 13      Set 14      Set 15      Set 16      Set 17      Set 18
  Set 19      Set 20      Set 21      Set 22      Set 23      Set 24      Set 25      Set 26      Set 27
  Set 28      Set 29      Set 30      Set 31
Share on Google Plus

    FB Comments


Post a Comment