Airport Engineering MCQ Quiz Questions and Answers - Set 09

Practice Test: Question Set - 09

1. Pick up the correct statement from the following:
    (A) Approximate geometric centre of the landing area, is called air port reference point
    (B) The boundaries of horizontal surface and conical surface are marked with reference to air port reference point
    (C) The location of the air port on a map is the position of air port reference point
    (D) All the above

2. As per ICAO, for airports serving big aircrafts, the crosswind component should not exceed
    (A) 15 kmph
    (B) 25 kmph
    (C) 35 kmph
    (D) 45 kmph

3. The threshold markings are
    (A) 4 m wide
    (B) 1 m clear space between adjacent
    (C) Placed symmetrically on either side of the runway centre line
    (D) All the above

4. Assertion A: The width of a taxiway is smaller than the runway width.
Reason R: The speed of the aircraft on a taxiway is greater than that on runway.
Select your answer based on coding system given below
    (A) Both A and R is true and R is the correct explanation of A
    (B) Both A and R is true but R is not the correct explanation of A
    (C) A is true but R is false
    (D) A is false but R is true

5. An aircraft is flying in an atmosphere of 30°C with a speed of 1260 kmph. Its speed is known as
    (A) Subsonic
    (B) Sonic
    (C) Super-sonic
    (D) Mach

6. The bearing of the runway at threshold is 290°, the runway number is
    (A) N 70° W
    (B) 290°
    (C) 29°
    (D) W 20° N

7. Pick up the correct statement from the following:
    (A) The speed of the aircraft relative to the ground, is called cruising speed
    (B) The speed of the aircraft relative to wind, is called air speed
    (C) When wind is blowing the direction of the flight, air speed is less than cruising speed
    (D) All the above

8. The centre to centre spacing of heliport lighting along the periphery of landing and takeoff area should be
    (A) 2.5 m
    (B) 5.0 m
    (C) 7.5 m
    (D) 10.0 m

9. Pick up the correct statement from the following:
    (A) Approach zone survey is carried out to determine the elevations of the protruding obstructions above horizontal, conical and transitional surfaces
    (B) The wind data of an air port is depicted in the form of a chart known as wind rose
    (C) The landing and takeoff of the air craft is made against the wind direction
    (D) All the above

10. Pick up the correct statement from the following:
    (A) The basic length of a runway is increased at a rate of 7% per 300 m of elevation of M.S.L.
    (B) The standard temperature at the site is obtained by reducing the standard sea level temperature of 15°C at the rate of 6.5°C per 1000 m rise in elevation
    (C) The aerodrome reference temperature is the monthly mean of the mean daily temperature for the hottest month of the year
    (D) All the above

Show and hide multiple DIV using JavaScript View All Answers

Share on Google Plus

    FB Comments


Post a Comment