Engineering Drawing Practice Test with Answers - Set 10 - ObjectiveBooks

Engineering Drawing Practice Test with Answers - Set 10

Practice Test: Question Set - 10

1. The condition of a part when it contains the least amount of material is referred to as ________.
    (A) Smallest
    (B) LMC
    (C) MMC
    (D) Actual size

2. These units are based on inch-foot and yard measurements:
    (A) International customary units
    (B) U.S. metric units
    (C) U.S. customary units
    (D) ISO international units

3. In offset sections, offsets or bends in the cutting plane are all:
    (A) 90 degrees
    (B) 180 degrees
    (C) Either 90 or 180 degrees
    (D) 30, 60 or 90 degrees

4. In this type of auxiliary view, a break line is used to indicate the imaginary break in the views:
    (A) Primary
    (B) Secondary
    (C) Revolved
    (D) Partial

5. When designing a home for a client, one of the most important pre-design considerations that an architect needs to address is ________.
    (A) How much money the client is willing to spend
    (B) The site on which the house is to sit
    (C) The nearest grocery store
    (D) Whether or not there is a curb and gutter system

6. Placement of dimensions on a drawing is controlled by ________.
    (A) ANSI
    (B) The design engineer
    (C) Corporate drafting standards
    (D) All of the above

7. In the section view, the areas that would have been in actual contact with the cutting plane are shown with:
    (A) A cutting plane line
    (B) Section lining
    (C) Visible lines
    (D) Lines and arrows

8. This is how axonometric, oblique, and perspective sketches show objects:
    (A) Orthographically
    (B) Pictorially
    (C) Obliquely
    (D) Parallel

9. This is used to indicate that a surface is to be machined:
    (A) Finish mark
    (B) Machining mark
    (C) Roughness indicator
    (D) Coordinate mark

10. A ________ section allows the drafter to create a Cutting Plane line which is not in a straight line across the part.
    (A) Offset
    (B) Half
    (C) Whole
    (D) Broken out

11. This means that a feature of a finished product contains the maximum amount of material permitted by the tolerance dimensions for that feature:
    (A) Maximum material condition
    (B) Machined material condition
    (C) Maximum machined indication
    (D) Machine mark indication

12. Angles project true size only when the plane containing the angle and plane of projection are this:
    (A) Adjacent
    (B) Aligned
    (C) Perpendicular
    (D) Parallel

13. A back or backing weld is a type of:
    (A) Groove weld
    (B) Resistance weld
    (C) Arc and gas weld
    (D) Upset weld

14. A typical set of mechanical working drawings includes ________.
    (A) Exploded assembly
    (B) Part details
    (C) Parts list
    (D) All of the above

15. This is the range of digital or hard copy documents that specify the physical function requirements for a product:
    (A) Product design
    (B) Product definition
    (C) Drawing definition
    (D) Engineering design

Show and hide multiple DIV using JavaScript View All Answers

    Blogger Comment
    Facebook Comment