Practice Test: Question Set - 21
1. The rocks formed by gradual deposition, are called
- (A) Sedimentary
rocks
- (B) Igneous
rocks
- (C) Metamorphic
rocks
- (D) None
of these
2. Plastic
- (A) Is
an organic substance
- (B) Consists
of natural or synthetic binders
- (C) Finished
products are rigid and stable at normal temperature
- (D) All
the above
3. Apiece of sawn timber whose cross-sectional dimensions exceed 5 cm, in one direction and 20 cm in the other direction, is called a
- (A) Cant
- (B) Deal
- (C) Baulk
- (D) Strip
4. Rocks formed due to alteration of original structure due to heat and excessive pressure are called
- (A) Sedimentary
rocks
- (B) Igneous
rocks
- (C) Metamorphic
rocks
- (D) None
of these
5. Geologically, marble is known as
- (A) Sedimentary
rock
- (B) Igneous
rock
- (C) Metamorphic
rock
- (D) Stratified
rock
6. Iron ore may contain
- (A) Carbon
- (B) Silicon
- (C) Phosphorus
and manganese
- (D) All
the above
7. Pick up the incorrect statement from the following:
- (A) Plastics
are chemical resistant
- (B) Plastics
are durable
- (C) Plastics
are ductile
- (D) Plastics
are excellent electric insulators
8. The cracks caused by shrinkage of the exterior surface of the wood exposed to atmosphere, are called:
- (A) Radial
shakes
- (B) Heart
shakes
- (C) Wind
cracks
- (D) Twisted
fibres
9. Pig iron is manufactured from the ores by
- (A) Dressing
- (B) Calcination
and roasting
- (C) Smelting
- (D) All the
above
10. Pick up the correct statement from the following:
- (A) The
plywoods do not split or crack due to changes in atmosphere
- (B) The
commercial plywoods are available upto 150 cm wide and upto 300 cm long
- (C) The
plywoods possess uniform tensile strength in all directions
- (D) All
the above
11. Jhumb bricks are
- (A) Under
burnt
- (B) Over
burnt
- (C) Kutcha
- (D) None
of these
12. Pick up the correct statement from the following:
- (A) Steel
produced by open hearth process is milder than that obtained by the Bessemer
process
- (B) Engineers
prefer open hearth steel for structural purpose as it is more homogenous
- (C) Basic
Bessemer process is suitable for converting poor ore containing a large
proportion of sulphur and phosphorus into steel
- (D) All
the above
13. Refractory bricks resist
- (A) High
temperature
- (B) Chemical
action
- (C) Dampness
- (D) All
the above
14. The thermosetting plastic
- (A) Becomes
rigid when moulded at suitable pressure and temperature
- (B) At 127°C to
177°C permanently set and further application of heat does not soften it
- (C) Chars
at 343°C
- (D) All
the above
15. Commonly used thinner in
- (A) Lacquer
paints, is alcohol
- (B) Cellulose
paints is ethyl acetate
- (C) Oil
paints, is naphtha
- (D) All
the above
Blogger Comment
Facebook Comment