Practice Test: Question Set - 22
1. The curved swellings from the growth of layers or wounds left after branches are cut off in an irregular manner are known as
- (A) Knots
- (B) Rindgalls
- (C) Burls
- (D) None
of these
2. Bitumen completely dissolves in
- (A) Carbon
bisulphide
- (B) Chloroform
- (C) Coal tar
- (D) All
of these
3. A stone is rejected if it absorbs water more than
- (A) 5 %
- (B) 10 %
- (C) 15 %
- (D) 20 %
4. The most commonly used synthetic abrasive is
- (A) Aluminium
carbide
- (B) Boric acid
- (C) Silicon
- (D) All
of these
5. During smelting process, the combination of fuel in the furnace
- (A) Forms
carbon dioxide
- (B) Carbon
dioxide with carbon forms carbon mono-oxide
- (C) Carbon
mono-oxide reacts with Fe2O3 to form iron and
liberates CO2
- (D) All
the above
6. According to ISI, bitumen is classified into
- (A) 2
grades
- (B) 4 grades
- (C) 8 grades
- (D) 10 grades
7. Basalt is
- (A) Sedimentary
rock
- (B) Metamorphic
rock
- (C) Extrusive
igneous rock
- (D) Intrusive
igneous rock
8. The size of mould for bricks, is generally kept
- (A) A
little large to specified size
- (B) A little
small to specified size
- (C) Equal to
specified size
- (D) 10% larger
than specified size
9. For construction of structures under water, the type of lime used, is
- (A) Hydraulic
lime
- (B) Fat lime
- (C) Quick
lime
- (D) Pure lime
10. French polish is
- (A) Oil paint
- (B) Distemper
- (C) Spirit
varnish
- (D) None to
these
11. Ultimate strength to cement is provided by
- (A) Tri-calcium
silicate
- (B) Di-calcium
silicate
- (C) Tri-calcium
aluminate
- (D) Tetra
calcium alumino ferrite
12. Wrought iron contains carbon about
- (A) 1.5% to 5.5%
- (B) 0.5% to
1.75%
- (C) 0.1% to
0.25%
- (D) None to
these
13. Galvanising means covering iron with a thin coat of
- (A) Tin
- (B) Zinc
- (C) Glaze
- (D) Coal tar
14. The rocks in which argil (or clay) predominates, are called
- (A) Siliceous
rocks
- (B) Argillaceous
rocks
- (C) Calcareous
rocks
- (D) Igneous
rocks
15. Name the type of cement from the following for canal linings:
- (A) Sulphate
resisting cement
- (B) Rapid
hardening cement
- (C) Quick
setting cement
- (D) Pozzolana
cement
Blogger Comment
Facebook Comment