Today, all competitive exams are Multiple Choice Questions(MCQ) based examination system and the main factor is to answer each question in a prescribed time. So, practice as much as possible before the original test you are going to face.
Total number of Multiple Choice Question (MCQ) is 15 and time allotted for each question is 30 seconds. After the allotted time, the question will be marked as un-attempt.
QUIZ
Test Conducted by: ObjectiveBooks.com
Next Mock Tests:
01. As per Indian Standard Specifications, the peak discharge for domestic purposes per capita per minute, is taken
(A) 1.80 litres for 5 to 10 users
(B) 1.20 litres for 15 users
(C) 1.35 for 20 users
(D) All the above
Answer: Option D
02. If Δ is the angle of deflection of a simple curve of radius R, the length of its long chord, is
(A) R cos Δ/2
(B) 2R cos Δ/2
(C) R sin Δ/2
(D) 2R sin Δ/2
Answer: Option D
03. Which of the following devices is used to transfer the wagons or locomotives to and from parallel tracks without any necessity of shunting?
(A) Triangle
(B) Turntable
(C) Traverser
(D) Scotch block
Answer: Option C
04. A construction estimate is used
(A) To judge tentatively or approximate value of the project
(B) To produce a statement of the approximate cost
(C) To decide an approximation of the value of the project and not the exact cost
(D) None of these
Answer: Option C
05. If ‘H’ is the overall height of a retaining wall retaining a surcharge, the width of the base slab usually provided, is
(A) 0.3 H
(B) 0.4 H
(C) 0.5 H
(D) 0.7 H
Answer: Option D
06. Generally acceptable nominal size of aggregates for reinforced concrete, is
(A) 10 mm
(B) 15 mm
(C) 20 mm
(D) 25 mm
Answer: Option C
07. Three forces which act on a rigid body to keep it in equilibrium. The forces must be coplanar and
(A) Concurrent
(B) Parallel
(C) Concurrent parallel
(D) None of these
Answer: Option A
08. A simply supported beam (l + 2a) with equal overhangs (a) carries a uniformly distributed load over the whole length, the B.M. changes sign if
(A) l > 2a
(B) l < 2a
(C) l = 2a
(D) l = 4a
Answer: Option A
09. You are asked to design and supervise a truss for a factory to have spans 6 m to 9 m. The type of the truss you will use, is
(A) Mansard truss
(B) Queen post truss
(C) King post truss
(D) Collar truss
Answer: Option C
10. If the shearing stress is zero on two planes, then the angle between the two planes is
(A) 45°
(B) 90°
(C) 135°
(D) 225°
Answer: Option B
11. The sound which continues even after its source is cut off, is called
(A) Reverberation
(B) Echo
(C) Intensity of sound
(D) Interference
Answer: Option A
12. The chloride content of treated water for public supplies should not exceed
(A) 100 ppm
(B) 150 ppm
(C) 200 ppm
(D) 250 ppm
Answer: Option D
13. The line of intersection of two surfaces of a sloping roof forming an internal angle less than 180°, is known as
(A) Ridge
(B) Hip
(C) Valley
(D) None of these
Answer: Option C
14. In a sedimentation tank (length L, width B, depth D) the settling velocity of a particle for a discharge Q, is
(A) Q/(B × D)
(B) Q/(L × D)
(C) Q/L
(D) Q/(B × L)
Answer: Option D
15. Pick up the correct statement from the following:
(A) Bricks are paid per thousand
(B) Cement is paid per 50 kg bag
(C) Lime is paid per quintal
(D) All the above
Answer: Option D