Today, all competitive exams are Multiple Choice Questions(MCQ) based examination system and the main factor is to answer each question in a prescribed time. So, practice as much as possible before the original test you are going to face.
Total number of Multiple Choice Question (MCQ) is 15 and time allotted for each question is 30 seconds. After the allotted time, the question will be marked as un-attempt.
QUIZ
Test Conducted by: ObjectiveBooks.com
Next Mock Tests:
01. The gradient on which an additional engine is required to negotiate the gradient, is called
(A) Momentum gradient
(B) Pusher gradient
(C) Ruling gradient
(D) Steep gradient
Answer: Option B
02. Highway Research Board (HRB) classification of soils is based on
(A) Particle size composition
(B) Plasticity characteristics
(C) Both particle size composition and plasticity characteristics
(D) None of the above
Answer: Option C
03. The item of steel work which is measured in sq.m, is
(A) Collapsible gates
(B) Rolling shutters
(C) Ventilators and glazing
(D) All the above
Answer: Option D
04. The aggregate impact value of the aggregate used in
(A) Building concrete is less than 45
(B) Road pavement concrete is less than 30
(C) Runway concrete is less than 30
(D) All the above
Answer: Option D
05. Pick up the correct statement from the following:
(A) In basic Bessemer process, the steel heats the converter
(B) In open-hearth process, the furnace heats the steel
(C) In Siemens process, the impurities of pig iron are oxidised by the oxygen of the ore
(D) All the above
Answer: Option D
06. Bulking of sand is
(A) Mixing of different sizes of sand particles
(B) Mixing of lime with sand
(C) Maximum water with sand
(D) Swelling of sand when wetted
Answer: Option D
07. Mud balls may be removed by
(A) Breaking and washing
(B) Washing the filter with a solution of caustic soda
(C) Removing, cleaning and replacing the damaged sand
(D) All the above
Answer: Option D
08. Pick up the correct statement from the following:
(A) The ends of a strut, are connected together with two rivets
(B) The members of strut will have at least two connections spaced equidistant in their length
(C) The members when separated back-to-back, the connecting rivets should pass through solid washer or packing
(D) All the above
Answer: Option D
09. The side face reinforcement is provided if the depth of the web of a beam exceeds
(A) 600 mm
(B) 650 mm
(C) 700 mm
(D) 750 mm
Answer: Option D
10. Side drains on both sides of a hill road, are essential when the road is
(A) Along the spur curves
(B) Along the re-entrant curves
(C) In cutting
(D) None of these
Answer: Option C
11. The clarigesters are
(A) Circular septic tanks
(B) Rectangular septic tanks
(C) Circular Imhoff double tanks with bottom hoppers
(D) Circular Imhoff double storey tanks without bottom hoppers
Answer: Option D
12. In a combined footing for two columns carrying unequal loads, the maximum hogging bending moment occurs at
(A) Less loaded column
(B) More loaded column
(C) A point of the maximum shear force
(D) A point of zero shear force
Answer: Option D
13. Smith's test of stones is performed to find out
(A) The presence of soluble matter of stone
(B) The compressive strength of the stone
(C) The hardness of the stone
(D) The toughness of the stone
Answer: Option A
14. Pick up the correct statement from the following:
(A) Forward pass is used for calculating earliest expected time
(B) Backward pass is used for calculating the latest occurrence time
(C) Maximum value of earliest expected time is used if there is more than one value of any event
(D) All the above
Answer: Option D
15. Pick up the correct statement from the following:
(A) The difference between sales revenue and cost of goods sold, is known as 'Gross Profit'
(B) The gross profit percentage is the average profit margin obtained on goods sold
(C) The relationship of contribution to sales is known as contribution ratio
(D) All of these
Answer: Option D
