Basic Questions in Chemical Engineering - Set 32 - ObjectiveBooks
Basic Questions in Chemical Engineering - Set 32

Basic Questions in Chemical Engineering - Set 32

Edit

Practice Test: Question Set - 32

1. Alloy powder manufactured by the following process have spherical shapes.
    (A) Electrochemical deposition
    (B) Gaseous reduction
    (C) Atomisation
    (D) Mechanical attrition
2. What is the value of included angle of a triangular notch for maximum discharge?
    (A) 30°
    (B) 60°
    (C) 90°
    (D) 120°
3. Glycerine is used as a coolant in cooling of some engines instead of water, because
    (A) Its higher boiling point (290°C) increases its heat carrying capacity
    (B) Comparatively less weight of coolant is required
    (C) Smaller radiator can be used
    (D) All a, b & c
4. Which of the following is a boiler accessory i.e., not a boiler mounting?
    (A) Blow off cock
    (B) Feed check valve
    (C) Feed water pump
    (D) Stop valve
5. The product (s) of roasting of a sulphide ore is (are)
    (A) Oxide only
    (B) Sulphate only
    (C) Oxide and sulphate
    (D) Dependent on temperature and partial pressure of oxygen & sulphur dioxide
6. The most important requirement for aluminium industry is the availability of cheap
    (A) Ore
    (B) Electrical power
    (C) Labour
    (D) Abundant water
7. A jig is used while __________ a hole.
    (A) Boring
    (B) Counter boring
    (C) Drilling
    (D) Enlarging
8. Steel containing low percentage of nickel, chromium & tungsten are termed as the __________ steel.
    (A) Wrought
    (B) Tool
    (C) Alloy
    (D) Plain carbon
9. The heat treatment to which the steel wire containing > 0.25% carbon is subjected to is
    (A) Full annealing
    (B) Bright annealing
    (C) Patenting
    (D) None of these
10. Materials having resistivity ranging from 1 to 100 ohm. cm is termed as
    (A) Conductor
    (B) Insulator
    (C) Semi-conductor
    (D) None of these
11. Gantt charts are used for streamlining the
    (A) Inventory control
    (B) Production schedule
    (C) Sales forecasting
    (D) Quality control
12. Plasma is
    (A) A high temperature neutral gas
    (B) Nothing but ionized gas
    (C) A source of steady and highest controllable pressure
    (D) Formed at very low temperature
13. Thermodynamic cycle involved in the working of a thermal power plant is the __________ cycle.
    (A) Joule
    (B) Carnot
    (C) Rankine
    (D) Brayton
14. Heat flow across a hollow sphere of inner radius 'r1' and outer radius 'r2' is directly proportional to
    (A) (r2 - r1)/r1. r2
    (B) r1. r2/(r2 - r1)
    (C) (r2 + r1)/r1. r2
    (D) r1. r2/(r2 + r1)
15. Faraday's law of electrolysis is related to the
    (A) Cation speed
    (B) Atomic number of the cation
    (C) Equivalent mass of the electrolyte
    (D) None of these
Show and hide multiple DIV using JavaScript View All Answers
 Next Tests:

    Blogger Comment
    Facebook Comment