Practice Test: Question Set - 04
1. Consider as RS flip-flops with both inputs set to 0. If a momentary '1' is applied at the input S, then the output
- (A) Q will flip
from 0 to 1
- (B) Q will flip
from 0 to 1 and then back to 0
- (C) Q̅ will
flip from 0 to 1
- (D) Q̅ will
flip from 0 to 1 and then back to 0
2. A half-adder adds _______ bits
- (A) 2
- (B) 8
- (C) 10
- (D) 16
3. The OR gate has two or more input signals. If any input is _______ the output is high.
- (A) Low
- (B) High
- (C) Zero
- (D) None of the
above
4. The functional capacity for LSI devices is
- (A) 1 to 11
gates
- (B) 12 to 99
gates
- (C) 100 to
10,000 gates
- (D) More than
10,000 gates
5. Conversion of decimal number 9910 to it's binary number equivalent is
- (A) 11000112
- (B) 1000112
- (C) 11100012
- (D) 11110002
6. What logic function is obtained by adding an inverter to the output of an AND gate?
- (A) OR
- (B) NAND
- (C) XOR
- (D) NOR
7. Conversion of decimal number 6110 to it's binary number equivalent is
- (A) 1111012
- (B) 1111002
- (C) 1100112
- (D) 0011012
8. The main advantage of hexadecimal numbers is the case of conversion from hexadecimal to ________ and vice versa.
- (A) Decimal
- (B) Binary
- (C) ASCE
- (D) BCD
9. Conversion of decimal number 2810 to it's octal number equivalent is
- (A) 328
- (B) 408
- (C) 348
- (D) 368
10. BCD numbers are useful whenever _______ information is transferred into or out of a digital system.
- (A) Decimal
- (B) Binary
- (C) ASCII
- (D) Hexadecimal
11. Cyclic codes are used in
- (A) Data
transfer
- (B) Continuously
varying signal representation
- (C) Arithmetic
and logical computation
- (D) None
of the above
12. Instead of counting with binary numbers, a ring counter uses words that have a single high ________
- (A) Bytes
- (B) Bit
- (C) Gate
- (D) Chip
13. What is the 2's-complement representation of -24 in a 16-bit microcomputer?
- (A) 0000 0000
0001 1000
- (B) 1111 1111
1110 0111
- (C) 1111 1111
1110 1000
- (D) 0001 0001
1111 0011
14. Conversion of binary number 1000112 to an octal number is
- (A) 438
- (B) 478
- (C) 498
- (D) 508
15. With positive clocking the clock signal must be ________ for the flip-flop to respond.
- (A) High
- (B) Low
- (C) Set
- (D) Race
Next Tests:
Blogger Comment
Facebook Comment