Hand Tools ITI Machinist Objective Questions and Answers - ObjectiveBooks

Hand Tools ITI Machinist Objective Questions and Answers

Practice Test: Question Set - 01


1. The bench vice is called as parallel jaw vice because
    (A) It can hold the jobs having parallel sides
    (B) It is fixed parallel to the shop floor
    (C) Its width of jaws are parallel
    (D) Its movable jaw moves parallel to the fixed jaw

2. Vice clamps are used to
    (A) Protect the finished surfaces of the job
    (B) Hold the job firmly
    (C) Protect the serrated jaws of the vice
    (D) Protect the file

3. The peen of a straight-peen hammer is
    (A) Angular to the handle
    (B) Straight to the handle
    (C) Cross to the handle
    (D) Bent towards the handle

4. The length of the hammer handle for a 500g hammer should be about
    (A) 275 mm
    (B) 300 mm
    (C) 325 mm
    (D) 350 mm

5. The movable jaw of a bench vice is not moving even though the spindle is turned. It is due to the reason that
    (A) Fixed and movable jaws are over tight
    (B) Spindle pin is broken
    (C) Spring is not functioning
    (D) Threads on spindle are slightly worn out

6. Which one of the following types of hammers is used for forming a rivet head by spreading the shank of the rivet?
    (A) Ball peen hammer
    (B) Cross peen hammer
    (C) Straight peen hammer
    (D) Soft hammer

7. The bench vice spindle is made of
    (A) Mild steel
    (B) Cast iron
    (C) Tool steel
    (D) Bronze

8. For general purpose, a bench vice is fixed at a height of
    (A) 80 cm
    (B) 90 cm
    (C) 106 cm
    (D) 125 cm

9. The peen of a cross-peen hammer is
    (A) Angular to the handle
    (B) Straight to the handle
    (C) Cross to the handle
    (D) Bent towards the handle

10. The hand vice is used for
    (A) Fixing heavy jobs
    (B) Tightening nuts and bolts
    (C) Holding round jobs
    (D) Doing minute work

11. The jaw plates of a bench vice are made of
    (A) Tool steel
    (B) Mild steel
    (C) Cast iron
    (D) Bronze

12. The box nut of a bench vice is made of
    (A) Mild steel
    (B) Phosphorous bronze
    (C) White metal
    (D) Alloy steel

13. The jaws in this type of wrench open parallel with the help of a screw thus proving suitable for all sizes of nuts. These are:
    (A) Pipe wrenches
    (B) Monkey wrenches
    (C) Socket wrenches
    (D) Allen wrenches

14. The pin vice is used for
    (A) Holding odd-shaped small work pieces
    (B) Fixing the pins
    (C) Holding the pins
    (D) Holding the studs

15. Generally the length of the handle of a vice is
    (A) 1.5 times the nominal size of the vice
    (B) 2.5 times the nominal size of the vice
    (C) 3.5 times the nominal size of the vice
    (D) 4.5 times the nominal size of the vice

Show and hide multiple DIV using JavaScript View All Answers

    Blogger Comment
    Facebook Comment
adplus-dvertising