Application of Slotter Machine - Slotter Multiple Choice Questions - Set 01 - ObjectiveBooks

Application of Slotter Machine - Slotter Multiple Choice Questions - Set 01

Practice Test: Question Set - 01


1. Which one of the following mechanisms is used for driving the main shaft of a slotter?
    (A) Pawl and ratchet wheel mechanism
    (B) Worm and worm wheel mechanism
    (C) Cam mechanism
    (D) Bevel gear mechanism

2. Which one of the following operations can be done on slotting machine?
    (A) External keyway on long shaft
    (B) Internal grooves
    (C) Woodruff key way on a shaft
    (D) Keyway for feather key

3. Which type of tool head allows the tool to move away from work on the return stroke?
    (A) Rotating tool head
    (B) Extension tool head
    (C) Relieving tool head
    (D) Plain type tool head

4. What is the property of oil starts vaporing?
    (A) Fire point
    (B) Pour point
    (C) Flash point
    (D) Boiling point

5. Which part s position was changed for adjusting stroke length of slotting machine?
    (A) Ram
    (B) Slotted link
    (C) Sliding block
    (D) Connecting rod

6. Important characteristic(s) of the slotter tool is/are:
    (A) Overall shape
    (B) Various cutting angles
    (C) Use of cross-sectional area of the tool which should be as big as possible to ensure tool rigidity
    (D) All the above

7. Which one of the following statements is correct?
    (A) Slotter table can be indexed by using index plate
    (B) Internal hexagon cannot be machined on slotter
    (C) In a slotter, the ram position cannot be adjusted
    (D) When slotting a regular workpiece, it should be placed exactly at the centre of slotter table

8. Which one of the slotter tools can cut efficiently with negative rake angle on hard metals?
    (A) Stellite tool
    (B) Cemented carbide tipped tool
    (C) High carbon steel tool
    (D) High speed steel tool

9. What is the name feed movement if table moves towards and away from the column of slotter?
    (A) Cross movement
    (B) Circular movement
    (C) Vertical movement
    (D) Longitudinal movement

10. Which device is used for checking the perpendicularity of the tool shank in slotter?
    (A) Steel rule
    (B) Try square
    (C) Angle plate
    (D) Straight edge

11. Which types of spline equally spaced of grooves parallel in both directions, radial and axial?
    (A) Involute spline
    (B) Parallel key spline
    (C) Serration
    (D) Ball spline

12. Which part holds the tool in a slotting machine?
    (A) Clamps
    (B) Tool head
    (C) Tool post
    (D) Collet chuck

13. In some special slotters the ram may be set about:
    (A) 10° from the vertical plane
    (B) 15° from the vertical plane
    (C) 20° from the vertical plane
    (D) 30° from the vertical plane

14. The base of circular table of slotter is graduated:
    (A) 0 to 45°
    (B) 0 to 90°
    (C) 0 to 180°
    (D) 0 to 360°

15. Which of the following tool head is using for slotting of large diameter jobs?
    (A) Rotating tool head
    (B) Extension tool head
    (C) Relieving tool head
    (D) Plain type tool head

Show and hide multiple DIV using JavaScript View All Answers

 Next Tests:

    Blogger Comment
    Facebook Comment
adplus-dvertising