Carpentry Joints Quiz Questions - Draughtsman Civil - Set 03 - ObjectiveBooks

Carpentry Joints Quiz Questions - Draughtsman Civil - Set 03

Practice Test: Question Set - 03


1. What is the instrument with its telescope can be revolved through 180 Degree in a vertical plane about its horizontal axis?
    (A) Auto level
    (B) Dumpy level
    (C) Transit theodolite
    (D) Non-Transit theodolite

2. What is the method used for the instrument is suspected with improper adjustments and the error is doubled or reversal of telescope?
    (A) Prolonging a line by 1st method
    (B) Prolonging a line by 2nd method
    (C) Prolonging a line by 3rd method
    (D) Prolonging a line by 4th method

3. What is the term referred as fixing of small timber battens to timber walls with laths and boards are nailed to it?
    (A) Rebating
    (B) Studding
    (C) Mitering
    (D) Grooving

4. What is the name of the level that does not require any protection from the sun?
    (A) Titling level
    (B) Auto level
    (C) Dumpy level
    (D) Wye (y) level

5. What method of contour is suitable for contouring in hilly areas?
    (A) By square method
    (B) By cross section method
    (C) By tachometry method
    (D) By levelling method

6. What is the name of theodolite with one of its telescope cannot be revolved through 180° in a vertical plane about its horizontal axis?
    (A) Auto level
    (B) Dumpy level
    (C) Transit Theodolite
    (D) Non - Transit theodolite

7. Which method is adopted while the instrument in improper adjustment to establish the intermediate point?
    (A) Back sight
    (B) Fore sight
    (C) Single sighting
    (D) Double sighting

8. What is the ventilator provided in continuation of Door/Window at its top?
    (A) Fanlight
    (B) Sky light
    (C) Dormer Window
    (D) Corner Window

9. What is the size of opening for designation ‘6 WS 12’?
    (A) 600 × 1200
    (B) 1200 × 1000
    (C) 1200 × 1200
    (D) 1000 × 1000

10. Which line is normal to plumb line at all points?
    (A) Level line
    (B) Vertical line
    (C) Curved line
    (D) Horizontal line

11. What will be the difference of level A and B if the B.S is 3.560m and F.S is 2.860m?
    (A) 1.700 m
    (B) 1.600 m
    (C) 1.500 m
    (D) 0.700 m

12. What is the adjustment done to place the vertical axis exactly over the station?
    (A) Setting up
    (B) Centering
    (C) Levelling up
    (D) Focusing

Show and hide multiple DIV using JavaScript View All Answers

 Next Tests:

    Blogger Comment
    Facebook Comment
adplus-dvertising