Carpentry Works Multiple Choice Questions - Set 01 - ObjectiveBooks

Carpentry Works Multiple Choice Questions - Set 01

Practice Test: Question Set - 01


1. Which type of hammer is used for extracting the nails out of the wood?
    (A) Ball peen hammer
    (B) Claw peen hammer
    (C) Cross peen hammer
    (D) Straight peen hammer

2. There are several application of try square. Which one of the following cannot be done by using a try square?
    (A) Check parallel of work piece surface
    (B) Check squareness of field surface
    (C) Check flatness of surface
    (D) Mark lines at 90° to the edge of a work piece

3. Which type of half lap joint is used where one part of a job meets another part at some distance from the ends?
    (A) End-lap joint
    (B) Middle-lap joint
    (C) Cross-lap joint
    (D) Corner-lap joint

4. The cutting blades of jack plane are made up of:
    (A) High speed steel
    (B) High carbon steel
    (C) Tungsten steel
    (D) Alloy steel

5. Which tool is used for cutting square holes in mica sheets used on wooden boards in electric wiring?
    (A) Tenon saw
    (B) Key hole saw
    (C) Hack saw
    (D) Carpenter saw

6. The pitch of the wood screw is the distance:
    (A) From the tip to the end of threaded portion
    (B) Between the adjacent threads
    (C) From the head to the unthreaded portion
    (D) From the head to the tip

7. Which type of bench plane is suitable to plane a small wooden piece?
    (A) Jack plane
    (B) Smoothing plane
    (C) Coarse plane
    (D) Rebate plane

8. Middle lap type, half lap joint is used where:
    (A) Two part of a frame cross each other
    (B) One part of a job meets another part
    (C) Two parts of a job cross each other at the ends
    (D) Two parts of a job meet mean the ends

9. Which type of file you would select for filing a wooden plank?
    (A) Round file
    (B) Rasp cut file
    (C) Bastard file
    (D) Single cut file

10. What is the type of chisel you would select for squaring the corners?
    (A) Cross cut chisel
    (B) Half round nose chisel
    (C) Diamond point chisel
    (D) Web chisel

11. Which type of chisel is used for finishing the wood joints?
    (A) Firmer chisel
    (B) Bevel-edge firmer chisel
    (C) Paring chisel
    (D) Mortise chisel

12. Which type of chisel is used for making rectangular holes in wood?
    (A) Mortise chisel
    (B) Paring chisel
    (C) Firmer chisel
    (D) Bevel firmer chisel

13. The name of the special type of screwdriver used where normal screwdriver cannot be applied is:
    (A) London pattern screwdriver
    (B) Cabinet pattern screwdriver
    (C) Electrician pattern screwdriver
    (D) Cranked screwdriver

14. The size of the hammer is specified by its:
    (A) Length of the peen
    (B) Diameter of the face
    (C) Weight of the hammer
    (D) Height of the head

15. Which type of chisel is used to clean sharp corners of the wood?
    (A) Firmer chisel
    (B) Bevel-edge firmer chisel
    (C) Paring chisel
    (D) Mortise chisel

Show and hide multiple DIV using JavaScript View All Answers

 Next Tests:

    Blogger Comment
    Facebook Comment
adplus-dvertising