Clamping Devices of Milling and Shaping MCQs - ObjectiveBooks

Clamping Devices of Milling and Shaping MCQs

Practice Test: Question Set - 01


1. Which bolt is used for holding work directly on milling machine?
    (A) T-bolt
    (B) Hexagonal
    (C) Eye bolt
    (D) Square bolt

2. What should be the Tolerance on jig?
    (A) 10-15% of the Tolerance on the job
    (B) 20-50% of the Tolerance on the job
    (C) 05-10% of the Tolerance on the job
    (D) 50-100% of the Tolerance on the job

3. Which of the following part of shaping machine holds & supports the work piece?
    (A) Base
    (B) Cross rail
    (C) Table
    (D) Column

4. Name the machine, where arbor is used to hold cutter for saving time?
    (A) Boring machine
    (B) Drilling machine
    (C) Milling machine
    (D) Lathe machine

5. Why fixture is used as a production device?
    (A) Hold work piece
    (B) Locate work piece
    (C) Holds & locate the work piece
    (D) Rotate wok piece

6. Drill jig bushing is generally made of?
    (A) Cast Iron
    (B) Tool steel
    (C) Cast Steel
    (D) Mild Steel

7. Which of the following tables are used in milling machine?
    (A) Trapezoidal
    (B) Circular
    (C) Rectangle
    (D) Square

8. Which among the following locators is best suitable for location of a round shape job?
    (A) ‘V' locater
    (B) Pin type locater
    (C) Adjustable stop locator
    (D) Wedge type locator

9. Which jig is used for drilling on thin sheet?
    (A) Table jig
    (B) Post jig
    (C) Sandwich jig
    (D) Solid jig

10. Which of the following is not holding device, in milling machine?
    (A) ‘V' block
    (B) Tail stock
    (C) Fixture
    (D) Collets

11. What part carries tool head in shaping machine?
    (A) Table
    (B) Column
    (C) Cross rail
    (D) Ram

12. Name the job holding device in shaping machine?
    (A) Cross rail
    (B) Vice
    (C) Ram
    (D) Column

13. How many cutters at a time milling machine can hold?
    (A) Multi cutter
    (B) Only one
    (C) Only two
    (D) Only three

14. Which of the following is used to guide the tool & hold the job in mass production?
    (A) Jig
    (B) Fixture
    (C) Housing
    (D) Gauge

15. Size of the milling machine is given by the dimension and maximum travel in three directions of which part?
    (A) Cutter
    (B) Arbor
    (C) Column
    (D) Work table

16. Which of the following part of shaper is used to hold the tool?
    (A) Tool head
    (B) Ram
    (C) Vice
    (D) Rail

17. Which device is used in sharping machine to hold the cylindrical work piece?
    (A) Plummer block
    (B) Square block
    (C) ‘U' block
    (D) ‘V' block

18. Which of the following jig made from a single block of steel to drill small work piece?
    (A) Box jig
    (B) Channel jig
    (C) Angle jig
    (D) Solid jig

Show and hide multiple DIV using JavaScript View All Answers

    Blogger Comment
    Facebook Comment
adplus-dvertising