Fastening Objective Questions and Answers Mock Test - Set 02 - ObjectiveBooks

Fastening Objective Questions and Answers Mock Test - Set 02

Practice Test: Question Set - 02


1. Which tap in a set have 20° chamfer at its end?
    (A) Intermediate tap
    (B) Taper tap
    (C) Plug tap
    (D) Second tap

2. What is the pitch of hacksaw blade?
    (A) Distance between adjacent teeth
    (B) Distance between pin holes
    (C) Distance between edges of blade
    (D) Distance between Top and bottom edges

3. Which key is used while hub slides axially on the shaft?
    (A) Woodruff key
    (B) Gib-Head key
    (C) Feather key
    (D) Hollow saddle key

4. What is the pitch of wave set in hex blade?
    (A) 0.4 mm
    (B) 0.8 mm
    (C) 1.2 mm
    (D) Over 1.0 mm

5. What is Tolerance of limits and fits system?
    (A) Difference between actual size and basic size
    (B) Difference between standard and minimum size
    (C) Difference between standard and maximum size
    (D) Difference between maximum and minimum size

6. Which part of drill bit fits in to the slot of drilling machine spindle?
    (A) Body
    (B) Tang
    (C) Flute
    (D) Web

7. Which type of locking device used on shaft and similar parts?
    (A) Split pin
    (B) Wire lock
    (C) Internal circlip
    (D) External circlip

8. Which type of fit will have maximum size hole and minimum size shaft?
    (A) Interference fit
    (B) Clearance fit
    (C) Transition fit
    (D) Shrinkage fit

9. What is the recommended gap between tool post and grinding wheel?
    (A) 1 mm
    (B) 2 mm
    (C) 3 mm
    (D) 4 mm

10. What is the material of the hand tap?
    (A) Cast Iron
    (B) Low carbon steel
    (C) High speed steel
    (D) Stainless steel

Show and hide multiple DIV using JavaScript View All Answers

 Next Tests:

    Blogger Comment
    Facebook Comment
adplus-dvertising