ITI Carpenter and Metal working Pattern MCQ - Set 01 - ObjectiveBooks
ITI Carpenter and Metal working Pattern MCQ - Set 01

ITI Carpenter and Metal working Pattern MCQ - Set 01

,

Practice Test: Question Set - 01

1. What is the use of fillet iron in pattern?
    (A) Avoid wears
    (B) Give exact radius
    (C) Improve the strength
    (D) Avoid waste of metal
2. What is the advantage of pattern allowance?
    (A) Reduce machining cast
    (B) Save the time of casting
    (C) Avoid mistake in casting
    (D) Easy to prepare the pattern
3. What is the advantage of layout?
    (A) Detail of pattern hand tool
    (B) Complete details of pattern
    (C) Detail of process the casting
    (D) Detail of moulding temperature
4. Which depends upon the size and shape of the dowel pins?
    (A) Color and wood
    (B) Fillet and fillet iron
    (C) Pattern and core box
    (D) Template and allowance
5. When is the strickle core box required?
    (A) Core in irregular shape
    (B) Core in rectangular shape
    (C) Core in concave shape
    (D) Core in convex shape
6. What is the structure of dowel pins?
    (A) Square
    (B) Half round
    (C) Cylindrical
    (D) Rectangular
7. What is the advantage of cope and drag pattern?
    (A) Simplest of pattern
    (B) Large number of casting
    (C) Limited number of casting
    (D) Commonly used for casting small pulley
8. What is the type of rule called as shrinkage rule?
    (A) Steel rule
    (B) Folding rule
    (C) Zigzag rule
    (D) Contraction steel rule
9. What is the remedy for complicated in design of multi-piece pattern?
    (A) Prepare the pattern single piece
    (B) Prepare the pattern more than three pieces
    (C) Prepare the pattern more than four pieces
    (D) Prepare the pattern in more than two pieces
10. What is the advantage of teak wood in pattern making?
    (A) Low in price
    (B) Easy to shape
    (C) Light in color
    (D) Diagonal grain
11. Which type of rule is used by the pattern maker?
    (A) Foot rule
    (B) Steel rule
    (C) Collapsible rule
    (D) Contraction steel rule
12. Which is used to support and locate the core in the mould sand during the casting?
    (A) Fillets
    (B) Fillet iron
    (C) Core print
    (D) Loose piece
13. What is the requirement of core box?
    (A) According to shape and size
    (B) Pattern allowance
    (C) Structure of pattern
    (D) Production of casting
14. How much degree of drafting allowance is provided in pattern internal surface?
    (A) 6°
    (B) 5°
    (C) 4°
    (D) 3°
Show and hide multiple DIV using JavaScript View All Answers
 Next Tests:

    Blogger Comment
    Facebook Comment