Practice Test: Question Set - 01
1. What measurement is plotted to a plan or a map?
- (A) Linear
measurement
- (B) Angular
measurement
- (C) Vertical
measurement
- (D) Linear
and angular measurement
2. What is the name of the imaginary line of constant elevation on the ground surface?
- (A) Relief
- (B) Contour line
- (C) Contouring
line
- (D) Contour
interval
3. What is the smallest graduated division in levelling staff?
- (A) 0.5 m
- (B) 0.05 m
- (C) 0.005 m
- (D) 0.0005 m
4. What bench mark is established for short duration such as at the end of a day’s work?
- (A) Arbitrary
bench mark
- (B) Temporary
bench mark
- (C) Permanent
bench mark
- (D) GTS bench
mark
5. What is the message to indicate the movement of left arm over 90 Degree?
- (A) Return to
arm
- (B) Establish
the position
- (C) Move my
right
- (D) Move my left
6. What is the name of level designated as self aligning level?
- (A) Tilting
level
- (B) Auto level
- (C) Dumpy level
- (D) Wye (Y)
level
7. Which type of the collimation error is eliminated?
- (A) Dumpy level
- (B) Wye (y)
level
- (C) Cooke’s
reversible level
- (D) Cushing’s
level
8. What will be the difference of level A and B if the B.S is 3.560 m and F.S is 2.860 m?
- (A) 1.700 m
- (B) 1.600 m
- (C) 1.500 m
- (D) 0.700 m
9. Which column is used, the first entry in the level book page?
- (A) Fore sight
- (B) Back sight
- (C) Intermediate
sight
- (D) Height of
instrument
10. What is the name of the staff 3m long and the band fitted is graduated in mm used for precise levelling?
- (A) Solid staff
- (B) Invar staff
- (C) Folding
staff
- (D) Telescopic
staff
Next Tests: