Materials used for R.C.C - Draughtsman Civil MCQ - Set 02 - ObjectiveBooks

Materials used for R.C.C - Draughtsman Civil MCQ - Set 02

Practice Test: Question Set - 02

1. What is the excess length of the one side of the cranked bar?
    (A) 0.212 d
    (B) 0.414 d
    (C) 0.616 d
    (D) 0.818 d

2. What is the minimum number of main bars are provided for transverse reinforcement?
    (A) Two
    (B) Three
    (C) Three
    (D) Five

3. How many vertical bars (minimum number) are provided for circular column?
    (A) Four
    (B) Six
    (C) Eight
    (D) Ten

4. What is the total quantity of coarse and fine aggregate for 50kg cement for M15 grade of concrete required?
    (A) 625 kg
    (B) 480 kg
    (C) 330 kg
    (D) 250 kg

5. Where does covering of render is used?
    (A) Roof
    (B) Floor
    (C) Outside of the building
    (D) Inside of the building

6. Which material is coated at all the faces of concrete mould?
    (A) Water
    (B) Sand
    (C) Crude oil
    (D) Glue

7. Which of the following operation need to be done during earthquake?
    (A) Standing near the window
    (B) Collect and put together an emergency kit
    (C) Check your gas lines
    (D) Cover and hold on under a desk/table

8. What is the clear cover for foundation slabs and beams?
    (A) 15 mm
    (B) 25 mm
    (C) 40 mm
    (D) 50 mm

9. What is length of one ‘U’ type hook?
    (A) 4
    (B) 8
    (C) 9
    (D) 18

10. Which direction in one way slab the main reinforcement is provided?
    (A) Transverse
    (B) Length
    (C) Width
    (D) Depth

11. Which bar the hooks are provided?
    (A) Plain bars
    (B) Hot rolled deformed bars
    (C) Cold twisted bars
    (D) Hard - drawn steel wire

12. What is the weight/m of 12 mm diameter round bar?
    (A) 0.39 kg/m
    (B) 0.62 kg/m
    (C) 0.89 kg/m
    (D) 1.58 kg/m

13. What will be the compressive strength of 15cm cube after 28 days for a ordinary concrete of grade M30?
    (A) 30 N/mm2
    (B) 36 N/mm2
    (C) 40 N/mm2
    (D) 53 N/mm2

14. Name the reinforcement provided to counteract the tensional stress developed at corners of slab?
    (A) Main reinforcement
    (B) Torsion reinforcement
    (C) Singly reinforcement
    (D) Doubly reinforcement

15. What is the density of steel?
    (A) 75.8 q/m3
    (B) 78.5 q/m3
    (C) 85.7 q/m3
    (D) 87.5 q/m3

16. What is the name of the structure in which components such as beam, column and footing are monolithic in design and construction?
    (A) Portal frame
    (B) Non-portal frame
    (C) Rigid frame
    (D) Gabled frame

Show and hide multiple DIV using JavaScript View All Answers

 Next Tests: