Practice Test: Question Set - 01
1. Which is the overlock machine used to goods of textile finishing?
- (A) One thread
overlock machine
- (B) Two thread
overlock machine
- (C) Three thread
overlock machine
- (D) Four thread
overlock machine
2. Which is the machine is used for decorative purpose?
- (A) Zig Zag
machine
- (B) Handle
machine
- (C) Over lock
machine
- (D) Single
needle lock stitch machine
3. Which oil used for treadle sewing machine?
- (A) Grease oil
- (B) Lubricated
oil
- (C) Coconut oil
- (D) Kerosene oil
4. What is the function of stitch regulator?
- (A) Winding to
thread
- (B) Thread to
forms
- (C) Rotate to
fly wheel
- (D) Controls to
stitch length
5. How much stitches formed with over lock machine?
- (A) 100 class
- (B) 200 class
- (C) 400 class
- (D) 500 class
6. What is especially used for decorative purpose with longer stitches?
- (A) Hinged
presser foot
- (B) Gathering
foot
- (C) Presser foot
- (D) Zipper foot
7. Which purpose of used to motorized sewing machine in garment industry?
- (A) Low
production
- (B) Poor
production
- (C) High
production
- (D) Average
production
8. What is the function of motorized sewing machine parts of accelerator?
- (A) Control
the stitch
- (B) Control
the power stitch
- (C) Control
the speed
- (D) Control
the balance wheel
9. Which parts of helps to move the cloth forward whirl sewing?
- (A) Pressure
foot
- (B) Stop
motion screw
- (C) Feed dog
- (D) Stitch
regulator
10. Which parts to controls the length of the stitch?
- (A) Presser foot
lifter
- (B) Needle bar
- (C) Feed dog
- (D) Stitch
regulator
11. What is the remedy for needle breaking?
- (A) Set the
presser foot properly
- (B) Take - up
spring weak
- (C) Lower
tension too tight
- (D) Feed dog
dirty
12. How many feed dogs made in overlock machine?
- (A) One feed dog
- (B) Two feed dog
- (C) Three feed
dog
- (D) Four feed
dog
13. Which parts holds the needle at one end with help of the clamp?
- (A) Face plate
- (B) Fly wheel
- (C) Needle bar
- (D) Presser foot
14. How is maintain to when not in use sewing machine?
- (A) On the plug
- (B) Cover the
machine
- (C) Not cover
the machine
- (D) Motor
running condition
Next Tests:
Blogger Comment
Facebook Comment